Inverter 50 kVA 240 VDC 220/380 VAC SYNCHR ATS STS BYPASS

Purpose:

The inverter converts DC voltage into a 50 Hz sinusoidal AC voltage.
It can supply a wide range of industrial and domestic loads rated at 220–380 V AC, 50 Hz, up to 50 kVA for three-phase loads and up to 17 kVA per phase for single-phase loads.
The inverter has a built-in automatic transfer switch (ATS) that moves the load between the mains input and the inverter according to the priority the user sets on the inverter’s controller.
Has a built-in fast thyristor switch (static switch) that transfers the load between the mains input and the inverter quickly.
Monitors the state of the battery and the mains and shows the input and output states.

Output waveform — pure sine wave.
Silent, high-efficiency operation.
Total output power 50 kVA.
High-efficiency combined liquid-and-air cooling with 4 cooling levels and 5 automatic operating modes.
The battery charge monitoring system extends battery life by reducing the number of charge/discharge cycles.
Control panel with a backlit LCD showing the inverter output currents and voltages.
6 LED indicators showing the inverter status.
Audible warnings for the various operating modes, faults and system problems.
The control panel can be used to program operating modes, the monitored battery and mains parameters, and the modes of the built-in ATS.
Relay signalling inverter running or shutdown.
Low standby power consumption (under 20 W).
Automatic protection against overload and overtemperature.
Programmable deep-discharge protection for the batteries.
Soft start with large loads.
Built-in fast thyristor-based ATS.
Built-in automatic bypass that transfers the load to the mains when the battery is fully discharged or absent.